|
Sort:
|
| Item |
Qty |
Type |
Description |
Picture |
Cart |
| 11180 |
10 |
Air Chucks |
TIDLAND AND NIM-COR Air Chucks, 1.25", 1.5", 2" bars. |
_thumb.jpg "TIDLAND AND NIM-COR Air Chucks, 1.25\", 1.5\", 2\" bars.") |
  |
| 8859 |
88 |
Aspirator |
GRACO Aspirators with shut off valves. |
_thumb.jpg "GRACO Aspirators with shut off valves.") |
|
| 18022 |
1 |
Belmont Parts |
BELMONT 6810 Winder Parts |
_thumb.jpg "BELMONT 6810 Winder Parts") |
|
| 10984 |
17 |
Cams - 10" |
LEESONA 959 Steel Winder Cams, 10" traverse. |
 |
|
| 13938 |
123 |
Cams - 12" |
LEESONA Steel and Nylon Winder Cams, 12" traverse. |
 |
|
| 10985 |
140 |
Cams - 7.5" |
LEESONA Steel Winder Cams, 2 cop 7.5" traverse. |
 |
|
| 17326 |
1 |
Creel |
UNKNOWN Creel, 300 ends, stop motions, |
|
|
| 14378 |
86 |
Drive Panel |
LEESONA Drive panels, SAFETRONIC Model 968-1492-51, |
_thumb.jpg "LEESONA Drive panels, SAFETRONIC Model 968-1492-51,") |
|
| 16231 |
3 |
Dye Tubes |
NEW Sonoco Plastic Dye Tubes, 1-5/8" x 6-3/4", |
 |
|
| 16664 |
1 |
Expander |
GILBOS BEX Skein Expander, |
 |
|
| 17849 |
1 |
Extractor - 48" |
TROY Extractor, 48" diameter, 21" deep, ~150 lb cap for skeins. |
 |
|
| 17349 |
10 |
Floor Scrubber |
TENNANT Floor Scrubber, Model T7. |
|
|
| 18118 |
2 |
Hank Winder |
SIMA Rope Hank Machines, Model MA-6, 1979 & 2001 yrs, |
_thumb.jpg "SIMA Rope Hank Machines, Model MA-6, 1979 & 2001 yrs,") |
|
| 17905 |
80 |
Leesona parts |
LEESONA type "R" controls for 959 winders. |
|
|
| 12089 |
4 |
Oil Mist Units |
BARMAG SW46 Oil Mist Units, 1997 yr. |
 |
|
| 18093 |
1 |
Pedestal |
LEESONA Winder Pedestals, 6 positions, double deck |
 |
|
| 18092 |
5 |
Pedestals |
LEESONA Winder Pedestals, for single heads, NEW. |
 |
|
| 18154 |
1 |
Reroll - 80" |
ALEXANDER Reroll Machine, 80" wide, with |
 |
|
| 13114 |
1 |
Rewinder |
ZINSER Model 548 Rewinder, 24 positions, |
_thumb.jpg "ZINSER Model 548 Rewinder, 24 positions,") |
|
| 17968 |
6 |
Skein Expander |
GILBOS BEX Skein Expanders. |
_thumb.jpg "GILBOS BEX Skein Expanders.") |
|
| 16200 |
1 |
Skein Winder |
CROONE & LUCKE W400K Skein Reel, 18 positions, double reel, |
_thumb.jpg "CROONE & LUCKE W400K Skein Reel, 18 positions, double reel,") |
|
| 10209 |
5 |
Skein Winder |
CROON & LUCKE Z60A Skein Reels, 22.5" traverse x 92" skeins, |
 |
|
| 18418 |
1 |
Slitter - 1600mm |
FEBA Slitter, Model F600, 2014 yr. |
_thumb.jpg "FEBA Slitter, Model F600, 2014 yr.") |
|
| 18483 |
1 |
Slitter Winder - 33" |
UNKNOWN 33" Slitter Rewinder, 10 positions but using |
 |
|
| 16065 |
1 |
Spooler |
COLLINS #5 Spooler, 4 positions, bobbin creel, tensioning stand, |
_thumb.jpg "COLLINS #5 Spooler, 4 positions, bobbin creel, tensioning stand,") |
|
| 18283 |
1 |
Spooler |
CUSTOM Spooler Winder, 16 positions, 2016 yr, |
_thumb.jpg "CUSTOM Spooler Winder, 16 positions, 2016 yr,") |
|
| 18394 |
1 |
Spooler |
CUSTOM Spooler Winder, 7 positions. |
|
|
| 16097 |
1 |
Spooler - Cord |
AUBURN #5 Cord Spooler, 2" to 10" traverse, max 12" dia heads, |
_thumb.jpg "AUBURN #5 Cord Spooler, 2\" to 10\" traverse, max 12\" dia heads,") |
|
| 14367 |
1 |
Tensiometer |
KERNCO Tensitron Model TR-5000 Tensiometer, |
_thumb.jpg "KERNCO Tensitron Model TR-5000 Tensiometer,") |
|
| 15099 |
1 |
Tensiometer - 2,000 grams |
CHECKLINE Model DXX-200 Tensiometer, |
_thumb.jpg "CHECKLINE Model DXX-200 Tensiometer,") |
|
| 15091 |
1 |
Tensiometer - 30 grams |
CHECK LINE Model DXX-3 Tensiometer, |
_thumb.jpg "CHECK LINE Model DXX-3 Tensiometer,") |
|
| 15098 |
1 |
Tensiometer - 5,000 grams |
CHECKLINE Model DXX-500A Tensiometer, |
_thumb.jpg "CHECKLINE Model DXX-500A Tensiometer,") |
|
| 9884 |
1 |
Thread guides |
Ceramic Thread Guides. |
_thumb.jpg "Ceramic Thread Guides.") |
|
| 16099 |
3500 |
Tubes |
New Cardboard Tubes, 94mm x 300mm, |
|
|
| 13925 |
360 |
Tubes |
SONOCO Winding Tubes, |
_thumb.jpg "SONOCO Winding Tubes,") |
|
| 18121 |
7000 |
Tubes - 13" |
Aluminum Winder Tubes, 13" x 3-1/4"ID, |
 |
|
| 18376 |
1 |
Turret - 42" |
WEBCON Turret Winder & Accumulator, 42" rolls, |
|
|
| 18002 |
1 |
Unwind - 20" |
PINNACLE Unwind, 29-3/4"L x 3" dia air shaft, safety chucks, |
_thumb.jpg "PINNACLE Unwind, 29-3/4\"L x 3\" dia air shaft, safety chucks,") |
|
| 18303 |
1 |
Unwind - 47" |
UNKNOWN Unwind, 47" wide. |
_thumb.jpg "UNKNOWN Unwind, 47\" wide.") |
|
| 17420 |
1 |
Unwind - 70" |
UNKNOWN Unwind, 75" between 1-1/2" chucks, |
 |
|
| 17421 |
1 |
Unwind - 72" |
UNKNOWN Unwind, 78" between 1-1/2" chucks, |
 |
|
| 16646 |
1 |
Winder |
BELMONT Model AD-25 Winder, 18 spindles, autodoff, |
|
|
| 16645 |
1 |
Winder |
BELMONT Model AD-30 Winder, 24 spindles, autodoff, |
|
|
| 18053 |
1 |
Winder |
DIETZE + SCHEL Model PPM 1-2E, 47 positions, 2012 yr. |
_thumb.jpg "DIETZE + SCHEL Model PPM 1-2E, 47 positions, 2012 yr.") |
|
| 17843 |
2 |
Winder |
FADIS TUAN E500 Skein to Cone Winders, 25 positions, |
|
|
| 11753 |
4 |
Winder |
LEESONA 968 Winders, single pedestal, 2 cop 7-1/2" traverse |
_thumb.jpg "LEESONA 968 Winders, single pedestal, 2 cop 7-1/2\" traverse") |
|
| 16770 |
96 |
Winder |
LEESONA 976 Cop Winders. |
|
|
| 18060 |
1 |
Winder |
LEESONA Model 955 Rewinder, single position. |
|
|
| 18194 |
1 |
Winder |
MURATA Minimach 7R2 Winder, 5 position, |
_thumb.jpg "MURATA Minimach 7R2 Winder, 5 position,") |
|
| 17818 |
1 |
Winder |
NEUMAG Witras Hi Speed Winder, 8 positions, 2000 yr, |
 |
|
| 18249 |
1 |
Winder |
SAHM 211E Winder, 1998 yr, 40 positions, |
_thumb.jpg "SAHM 211E Winder, 1998 yr, 40 positions,") |
|
| 17817 |
5 |
Winder |
SAHM Hi Speed Winders, 2 & 4 cop machines. |
_thumb.jpg "SAHM Hi Speed Winders, 2 & 4 cop machines.") |
|
| 18051 |
1 |
Winder |
SAHM Model 211 E Winder, 36 positions, 2002 yr. |
 |
|
| 18052 |
1 |
Winder |
SAHM Model 211 E Winders, 42 positions, 1996 yr. |
_thumb.jpg "SAHM Model 211 E Winders, 42 positions, 1996 yr.") |
|
| 17497 |
1 |
Winder |
SCHWEITER Digicone Winder, 24 positions, 10" traverse, |
_thumb.jpg "SCHWEITER Digicone Winder, 24 positions, 10\" traverse,") |
|
| 15660 |
15 |
Winder |
WINCO Model F 3001-MKII Winders, |
_thumb.jpg "WINCO Model F 3001-MKII Winders,") |
|
| 18044 |
1 |
Winder - 10" |
BELMONT Winder, type AD-4062, 6 spindles, autodoff, |
|
|
| 18043 |
1 |
Winder - 10" |
BELMONT Winder, type AS4082/8, 8 spindles, autodoff, |
|
|
| 17967 |
8 |
Winder - 10" |
GILBOS GF10J Winders, 10" traverse on cone. |
_thumb.jpg "GILBOS GF10J Winders, 10\" traverse on cone.") |
|
| 18396 |
1 |
Winder - 10" |
SSM Digicone Winder, type DP3-C, 10" traverse on tubes. |
_thumb.jpg "SSM Digicone Winder, type DP3-C, 10\" traverse on tubes.") |
|
| 16647 |
2 |
Winder - 10"T |
BELMONT AD-3042A Winders, 18 spindles each, 10" |
_thumb.jpg "BELMONT AD-3042A Winders, 18 spindles each, 10\"") |
|
| 17557 |
1 |
Winder - 10"T |
LEESONA 861 Backwinders, 6 spindles, 10" traverse on cones. |
_thumb.jpg "LEESONA 861 Backwinders, 6 spindles, 10\" traverse on cones.") |
|
| 17500 |
1 |
Winder - 10"T |
LEESONA 861 Winder, 6 spindles, 10" traverse on ~68mm tube, |
_thumb.jpg "LEESONA 861 Winder, 6 spindles, 10\" traverse on ~68mm tube,") |
|
| 17498 |
5 |
Winder - 10"T |
LEESONA 861 Winders, 6 positions each with air tacking, |
_thumb.jpg "LEESONA 861 Winders, 6 positions each with air tacking,") |
|
| 18087 |
2 |
Winder - 10"T |
LEESONA 940 Winders,10" traverse on 3"ID tubes, ~2009 yr, |
_thumb.jpg "LEESONA 940 Winders,10\" traverse on 3\"ID tubes, ~2009 yr,") |
|
| 12494 |
2 |
Winder - 10" TU |
TORAY Winders, TW-55RA, double cop, 10" traverse, |
_thumb.jpg "TORAY Winders, TW-55RA, double cop, 10\" traverse,") |
|
| 18279 |
7 |
Winder - 12" |
LEESONA 965 Winders, 12 spindles, 12" traverse, 3-1/4" tubes, |
_thumb.jpg "LEESONA 965 Winders, 12 spindles, 12\" traverse, 3-1/4\" tubes,") |
|
| 17537 |
1 |
Winder - 126" |
BASTIAN Unwind & Rewind, 1600-3200mm web width, |
_thumb.jpg "BASTIAN Unwind & Rewind, 1600-3200mm web width,") |
|
| 18337 |
160 |
Winder - 12"T |
SAHM 230E Tape Winders, 300mm traverse., 1999 yr. |
|
|
| 18531 |
115 |
Winder - 12" traverse |
LEESONA 959 Winders, 12" traverse x 3-1/4" tube. |
|
|
| 10468 |
2 |
Winder - 16" |
LEESONA 967 Winder, single pedestal, |
_thumb.jpg "LEESONA 967 Winder, single pedestal,") |
|
| 16832 |
1 |
Winder - 185" |
FLEISSNER Winder, 185" wide, 240/415v, 2008 yr, |
_thumb.jpg "FLEISSNER Winder, 185\" wide, 240/415v, 2008 yr,") |
|
| 17168 |
1 |
Winder - 20" |
BIRCH BROTHERS Inspection Rewinder, 20" web width. |
|
|
| 17722 |
1 |
Winder - 30" |
STANFORD Doctor Machine, Model 142 LT, 30" web width, |
_thumb.jpg "STANFORD Doctor Machine, Model 142 LT, 30\" web width,") |
|
| 18062 |
144 |
Winder - 300mm |
BARMAG ATW Tape Winders, 300mm traverse x 90mm. |
_thumb.jpg "BARMAG ATW Tape Winders, 300mm traverse x 90mm.") |
|
| 18466 |
1 |
Winder - 300mm |
Nuova Protex Take Up Winder, Type A-300 B, 9 positions, 2000 yr, |
_thumb.jpg "Nuova Protex Take Up Winder, Type A-300 B, 9 positions, 2000 yr,") |
|
| 18336 |
132 |
Winder - 300mm |
SAHM 260E Winders, 300mm traverse x 90mm core, 1993 yr. |
|
|
| 18430 |
45 |
Winder - 300mm |
SAHM 320XE Winders, automatic, 300mm traverse x 90mm core. |
_thumb.jpg "SAHM 320XE Winders, automatic, 300mm traverse x 90mm core.") |
|
| 18529 |
232 |
Winder - 300mm |
SAHM Model 240E Winders, 300mm traverse x 90mm core, |
|
|
| 10339 |
1 |
Winder - 300mm |
SAHM Winders, type 280, 9 positions, 1986 yr, |
_thumb.jpg "SAHM Winders, type 280, 9 positions, 1986 yr,") |
|
| 11187 |
1 |
Winder - 32" |
INNOVATIVE EQUIPMENT Innowind Turret Winder, |
_thumb.jpg "INNOVATIVE EQUIPMENT Innowind Turret Winder,") |
|
| 18302 |
1 |
Winder - 48" |
AUTEFA Winder, 48" wide, 2 position unwind, crosscut slitter, |
_thumb.jpg "AUTEFA Winder, 48\" wide, 2 position unwind, crosscut slitter,") |
|
| 13303 |
1 |
Winder - 4 cop |
TEIJIN SEIKI Model AW 908 Automatic Winder, 4 cop, |
 |
|
| 18141 |
1 |
Winder - 5400mm |
MENZEL Winder, type TSK 111/03-005, 5400mm, |
|
|
| 17523 |
1 |
Winder - 6" |
LEESONA 50 Winder, 6 or 12 spindles, 6" traverse, |
_thumb.jpg "LEESONA 50 Winder, 6 or 12 spindles, 6\" traverse,") |
|
| 14330 |
2 |
Winder - 6" |
SHARER PS/2 twin disc cone winding machines |
_thumb.jpg "SHARER PS/2 twin disc cone winding machines") |
|
| 17975 |
1 |
Winder - 60" |
BIRCH BROTHERS Surface Rewind, 60" web width |
_thumb.jpg "BIRCH BROTHERS Surface Rewind, 60\" web width") |
|
| 18151 |
1 |
Winder - 60" |
STANFORD Doctor Machine, Model 252 FW, 60" (1524mm) web width. |
_thumb.jpg "STANFORD Doctor Machine, Model 252 FW, 60\" (1524mm) web width.") |
|
| 17353 |
1 |
Winder - 6.7M |
DSI Automatic Slitter Rewinder, ~6700mm wide, |
_thumb.jpg "DSI Automatic Slitter Rewinder, ~6700mm wide,") |
|
| 17423 |
1 |
Winder - 70" |
UNKNOWN Winder, 76" between chucks, |
|
|
| 11386 |
1 |
Winder - 72" |
UNKNOWN Winder, 72" shaft, 34" max diameter, 2004 yr. |
_thumb.jpg "UNKNOWN Winder, 72\" shaft, 34\" max diameter, 2004 yr.") |
|
| 17422 |
1 |
Winder - 72" |
UNKNOWN Winder, 78" between 1-1/4" chucks, |
 |
|
| 18525 |
1 |
Winder 78" |
UNKNOWN Winder, 78" x 3" shaft, ~40" dia, max, |
_thumb.jpg "UNKNOWN Winder, 78\" x 3\" shaft, ~40\" dia, max,") |
|
| 18450 |
1 |
Winder - 8" |
LEESONA 959 Winder, 6 spindles, 8" traverse on cones, |
_thumb.jpg "LEESONA 959 Winder, 6 spindles, 8\" traverse on cones,") |
|
| 17205 |
1 |
Winder - 85" |
MIAMI MACHINE Constant Speed Track Reel Winder, |
_thumb.jpg "MIAMI MACHINE Constant Speed Track Reel Winder,") |
|
| 17556 |
1 |
Winder - 8"T |
LEESONA 861 Backwinders, 6 spindles ea, 8" traverse on cones, . |
_thumb.jpg "LEESONA 861 Backwinders, 6 spindles ea, 8\" traverse on cones, .") |
|
| 17285 |
1 |
Winder - 8"T |
SCHWEITER Winder, 12 spindles, 10-1/2" x 1-7/8" tube. |
|
|
| 18137 |
10 |
Winder - 9.5" T |
LEESONA Winders, 9.5" traverse, coreless package, |
_thumb.jpg "LEESONA Winders, 9.5\" traverse, coreless package,") |
|
| 13240 |
1 |
Winder - Draw |
EDMUND ERDMANN Draw Winder, 12 positions, 1999 yr. |
_thumb.jpg "EDMUND ERDMANN Draw Winder, 12 positions, 1999 yr.") |
|
| 17573 |
1 |
Winder Lift |
BARMAG Craft Winder Lift for CW4 and CW6 Winders, NEW. |
_thumb.jpg "BARMAG Craft Winder Lift for CW4 and CW6 Winders, NEW.") |
|
| 10561 |
5 |
Winder parts |
Leesona Winder Parts for Model 50, 861, 859, 959, 968, 967. |
|
|
| 14624 |
1 |
Winder Parts |
LEESONA 859 and 959 parts - Consisting of: |
_thumb.jpg "LEESONA 859 and 959 parts - Consisting of:") |
|
| 7375 |
1 |
Winder Parts |
LEESONA Winder Parts. |
|
|
| 13280 |
3 |
Winders - 6" |
LEESONA Model 50 Winding machines, |
_thumb.jpg "LEESONA Model 50 Winding machines,") |
|
| 17840 |
2 |
Winder - Skein |
Fidelity Skein Winders. |
_thumb.jpg "Fidelity Skein Winders.") |
|
| 18211 |
2 |
Winder - Skein |
ZERBO Skein Winders, variable traverse for 12-30 skeins. |
_thumb.jpg "ZERBO Skein Winders, variable traverse for 12-30 skeins.") |
|
| 11178 |
1 |
Winder - Turret |
UNKNOWN Turret Winder, 91" between chucks, ~ 30-32" rewind dia, |
_thumb.jpg "UNKNOWN Turret Winder, 91\" between chucks, ~ 30-32\" rewind dia,") |
|
| 18021 |
1 |
Winder - Turret 64" |
EGAN Turret Rewinder, 64" max web width, 36" maximum rewind |
_thumb.jpg "EGAN Turret Rewinder, 64\" max web width, 36\" maximum rewind") |
|
| 18150 |
1 |
Winder - Turret 68" |
BLACK CLAWSON Turret Unwind with SOMA Flying Splicer, |
|
|
| 18020 |
1 |
Winder - Turret 76" |
EGAN Turret Rewinder, 72" - 76" max web width, 30" maximum |
_thumb.jpg "EGAN Turret Rewinder, 72\" - 76\" max web width, 30\" maximum") |
|
| 18100 |
1 |
Winding - 10 position |
ICBT Winder |
_thumb.jpg "ICBT Winder") |
|
